Re: Miss Silvia Problem
Von: Bertie Doe (montebrasite4@ntl.com) [Profil]
Datum: 26.09.2008 00:03
Message-ID: <6k2g68F5muroU1@mid.individual.net>
Newsgroup: alt.coffee
Datum: 26.09.2008 00:03
Message-ID: <6k2g68F5muroU1@mid.individual.net>
Newsgroup: alt.coffee
"Brewer Bob" < wrote in message >A buddy of mine has a stock(no pid) Rancillio Silvia and is having the >following problem: > > Power to the machine is good > Water temps are correct ~200-203F > He can here the vibe pump when he hits the brew button > There is water coming out with an empty PF(no coffee) > When he locks and loads the PF with espresso there doesn't appear to be > enough pressure to extract the coffee. > He is an experienced home Barista for 3 or 4 years so, I rule out operator > error. > > Any Ideas? If the pump is ok, what do alt.c Silvia owners think of the portafilter pressure guage mentioned in this article http://preview.tinyurl.com/3mg8db Is it worth spending $30 to get one? Useful for setting the brew at say 9.5 bar? Whilst on the subject of OP valves, would a piece of grit or scale, stuck in the PO valve spring, cause the valve to stick open?[ Auf dieses Posting antworten ]
Antworten
- Brewer Bob (26.09.2008 01:23)
- Ed Needham (26.09.2008 06:49)
- Jack Denver (26.09.2008 17:54)
- Ed Needham (27.09.2008 08:00)
- Brian Colwell (26.09.2008 03:22)
- daveb (27.09.2008 02:01)
- opo (27.09.2008 03:10)
- opo (27.09.2008 03:19)
- Brewer Bob (27.09.2008 21:46)
- Ed Needham (28.09.2008 02:58)
- anthony (29.09.2008 06:29)
- Ed Needham (29.09.2008 06:39)
